E-mail Us

CCTV Camera Solution for Office

The office building video security monitoring system adopts IP camera + security private network transmission + network storage server + IP management platform (including operation, management, etc.) + a distributed digital network video security monitoring system displayed on the TV wall to complete image collection, transmission, and management , Storage, display, reorganization and other complete video surveillance functions.


The monitoring points of YCX camera are set up as follows: 1 Set up outdoor Ip bullet cameras and integrated PTZ dome cameras at the perimeter of the building; 2 Set up main bullet cameras in the underground garage; 3 Set up outdoor integrated PTZ camera on the periphery of the building and at the main entrance and exit Set up fixed lens bullet cameras to assist in key monitoring; 4 Set up integrated fast dome cameras in places where there is a lot of people flow in buildings, such as entrance halls, staff restaurants, etc.; 5. Dome cameras are mainly installed in places such as monitoring centers; 6 Elevator cameras are installed in elevator.


The transmission method and system architecture are as follows: 1 The digital video security monitoring system adopts TCP/IP communication mode, and each camera is assigned an independent IP address. 2 In this design, the floor access switch is placed in the weak current room on the floor, and the specific floor is placed in the system diagram. 3 Due to the long transmission distance, the camera at the perimeter of the building uses a four-core outdoor optical fiber to transmit video signals to the weak current room on the floor. 4 The horizontal cable between the indoor IP camera and the weak current room on the floor uses Category 6 UTP cable. 5 The elevator camera transmits the video signal to the video encoder through the video cable, and then transmits it to the weak current room via the Category 6 cable. 6 The vertical trunk line between the weak current room on the floor and the computer room of the security monitoring center uses indoor multi-mode fiber. The vertical trunk lines from the first to the fourteenth floors converge to the heavy control room on the first floor, and the vertical trunk lines from the weak current rooms on the other floors converge to the fire and security broadcast room on the first floor.


The front-end bullet and dome camera uses POE power supply, and the integrated dome uses AC 24V power supply. All camera points can be recorded at the same time, and have anti-tampering function, the recording storage time is not less than 30Dayx24H, the number of video frames is not less than 25 frames/sec, and the video resolution 5MP and 4K. Display and control requirements: The monitoring center can flexibly switch and control the front-end cameras. The monitoring center can simultaneously display the monitoring pictures of key monitoring areas on the TV wall in real time.


Related Solution
Related CCTV Products
+86-13823513634
ceo@ycxcctv.com
6th Floor, 3 Building, Jianghao Industrial Park, Jihua Road, Bantian, Longgang District, Shenzhen
6th Floor, 3 Building, Jianghao Industrial Park, Jihua Road, Bantian, Longgang District, Shenzhen
ceo@ycxcctv.com
+86-13823513634